Пневмоконструкция Дерево-хаус

We work with transport companies: "Baikal Service", "Business Lines", "Express-Auto", "Energy", "ZhelDorEkspeditsiya" and others. A wide network of cooperation allows you to select the TC you are used to. In addition, in situations where the deadlines are on or if delivery is required at minimum rates, we will select the most convenient option for you from the existing list of companies.

Delivery is carried out in Russia, in the CIS countries and Europe.

Attention! Delivery to the terminal of the transport company in Yekaterinburg and to the terminal of the city of Moscow is free of charge!

Depending on the method of transportation, the number of days of transportation and its cost are calculated. Detailed information you can find out from the company's employees or preview the deadlines in the text below ...

The following delivery methods are available to you:

• Motor transport, general cargo and individual delivery - from 3 days.

• Air delivery - from 1 day

• Railway transport - from 3 days

• Delivery in the CIS and European countries - depend on the method of movement of cargo.

Each product is completed with the instruction manual, which contains requirements for installation, operation, compliance with safety measures and method of careful storage.

For the installation of products do not require special knowledge and tools. Products are installed in accordance with the attached instructions.

We pay special attention of our customers to the individuality of each product, the features of which are reflected in the contract, application and other documents attached to the product (technical data sheet or instruction). The Manufacturer shall not be liable for the independent actions or omissions of the Buyer in relation to the product and its use, in conditions other than those described in the contract and other documents accompanying the fulfillment of obligations, including warranty. For any questions of operation, you can contact our expert for clarification.

You can leave a request on our website or call the multichannel phone number 8 800 555-62-41. Also for you phone is available for the regions +7 (996) 174-39-79. If for some reason you can not contact the specified contacts, you can always order a "callback".

You can leave a request to our managers - by emailing info@airmir.ru or via the application: WhatsApp, Skype, Viber at +7 (996) 174-39-79 . As a rule, the processing of an application in our company takes no more than 25 minutes (during working hours).

The following payment methods are available to you:
1. Cashless payments are available for all customers, legal entities and individuals.
2. Transfer through Sberbank online or other online banks.
3. Available loans in the "Federal Bank".
4. Cash payment.

Attention! Payment terms are individual, check with your personal manager for payment and terms.

In our production, we use synthetic PVC fabrics, Oxford, TPU, Duspo, etc. All these types of polymers have water-repellent properties, but products made from them are not completely airtight. Moisture can penetrate the stitching segments of the segments, but under the long-term effects of precipitation in the form of rain, getting wet material is not excluded!

The general rules for structures made of PVC, Oxford, TPU, Duspo set mandatory storage requirements. Before storing the attraction, it is necessary to get rid of the remnants of moisture, pre-drying the product. Storage should be carried out in a moderately humid, ventilated room, at a temperature of from 0 to + 35 ° C.

If for some reason, the pneumo construction has lain (which we categorically, as a manufacturer do not recommend) in a cold room, then the product must be given time to “move away from winter” . To do this, place the attraction, for a while, in a warm environment.

Violations of storage conditions can lead to darkening, destruction of the structure of the material, the appearance of a fungus (mold), cracks in the print on the pictures. Especially often - this occurs in cases when the product was lying in a damp, cold room or, due to negligence, when moisture from the attraction shell was not completely removed, before placing it in a warehouse.

For questions regarding the storage, transportation of the product and the operating conditions, you can familiarize yourself in the form: question-answer in the product card of your interest, or contact our manager. We will surely help in the solution of emerging issues.

Inspect the ground; it should be level without any inclinations or obstacles. Estimate the distance to the lighting and heating elements, it should be not less than 3 meters, and not less than 1 meter to any structures.

Spread the casing on the surface of previously cleaned from piercing-cutting objects. Put the sleeve on the air pump, then tie the loop on the "neck" of the fan. Make sure that there are no things near the air intake box that could damage the air pump.

Install a hangar / tent, with a wind speed of no more than 7 m / s (operation is allowed with wind force up to 15 m / s - for hangars and up to 12 m / s - for tents). After completing the above steps, turn on the fan in the network. When inflating, straighten the folds of the shell so that the air penetrates the product cylinders faster. This method will help to take pneumo structure faster given shape.

Pneumatic frame took shape, it must be fixed on the surface. Fixation is carried out in two ways: by weighting and fastening loops dispersed around the structure perimeter. The ballast is laid out in the compartments of the hangar / tent cylinders, and the attachment to the loops is done by connecting the cord to the pegs immersed in the soil.

Operation of the product is allowed at a temperature of +40 to -40 ° C.

In a static state, the fabric can easily withstand from +40 to -40 ° C, but still, at a negative temperature close to the allowable, we do not recommend repeatedly crushing the shell without an urgent need. In the cold, microcracks can form, which after a certain time, lead to damage to the appearance of the fabric, in consequence, and reduce the service life of the hangar / tent.

To transport the product, regardless of the category of transport, should be in a production case, at a temperature of from +40 to -40 ° C.

Comfortable temperature range for storage from 0 to + 35 ° C. In addition, in order to avoid mold and fungi, it is forbidden to store the product without first drying it! To remove residual moisture, inflate the product for several hours indoors or outdoors in dry weather.

We are always open for the most active, enterprising, willing to open new horizons in business. And it doesn’t matter whether you start your own business from scratch or you already have a successful project.

What do we offer?

A successful product that is in constant demand in the Russian market. Inflatable figures, children's trampolines, obstacle lanes - and this is not the whole list of products, due to which you can build a full-fledged, profitable business or significantly expand the range, with benefits for the development of your company.

Unlike many companies that regulate the sales of their partners, we do not have this item in the contract. You can purchase our products, anytime, anywhere, without any sanctions and consequences for your business! In addition, cooperating with us, other useful “buns” are waiting for you: providing mock-ups and photographic materials, consulting on organizing advertising campaigns, free delivery to the terminal of your city (as agreed, depending on distance), and much more.

Read more and leave a request here .

We always have a choice of fabric, presented in more than 60 shades. You can always choose a combination of colors for your product on our website. In addition, our managers will help determine the choice, choosing the optimal combination of colors for your composition.

Attention! Reflected colors on the screen of your gadget / computer may differ slightly from the colors realized in the final product. This is due to both the color settings on your screen (color saturation), and the functions of expanding brightness, contrast and the predominant effects: blue, red screen, etc.

When developing an individual layout for your technical task, the work of the designer is paid separately, in the amount of 3,500 rubles (cost agreed separately). If later, the sample is approved by you, and the figure will be made by us, then the payment made will be credited to the established cost of the figure. In other words, when you pay for an individual product - you get a 3d sketch for free.

Upon completion of the manufacture of the product, a photo report of the finished product is provided, as a rule, made from several angles: the general plan, photos from several sides and photographs of individual elements.

I liked the inflatable product in the picture on the Internet, but for some reason you can not buy at the addressee? No problem! You can always contact our specialists with a sketch or a photo you like. Our designers will outline all the contours of the figure you like, while technologists and sewing craftsmen will prepare patterns and make the product.

After your first request, our manager will contact you to clarify the details of the order, tell you about the time of manufacture, agree on the dimensions of the product, color, material, etc. After that, the agreed details are written in the contract annex, and the document is mutually signed. We send its scanned copy to your email (or via whatsApp, viber) for final approval.

According to the agreed proportions of payment - you pay for the product. In turn, after the receipt of funds on the account or the provision of a payment order - from our side, a 3D model of the product is developed and agreed upon. Upon its completion, the electronic model is given for production.

Work with documents is made by three methods. Sending documents in place with the finished product to your address, which is somewhat longer than sending by Russian Post or courier service. The last two methods of shipment is carried out in the case when it is impossible to pay for the product without the originals or at your request, but with the agreement of our manager.

Запрещено передвигать и перемещать пневмоконструкции в надутом / в развернутом состоянии за петли и крепежные элементы. Используйте петли только для крепления пневмоконструкции на поверхности.

Перемещать пневмоконструкции допускается только в сдутом состоянии, единым модулем в свернутом виде (запрещено тащить войлоком, поднимать от земли). Перед монтажом ознакомьтесь с техническим паспортом!